click to zoom| Harga | Rp Hubungi Kami @ GPS Geodetic RTK GNSS Emlid Reach RS2 Gets a fix in seconds Reach RS2 gets a fixed solution in ... |
| Kategori | Gps Geodetic |
| Share | |
| Hubungi Kami | |
| BELI |
Review Jual GPS Geodetic Emlid Reach RS2 di Makassar | Harga Terbaru 2022
Rp Hubungi Kami @
GPS Geodetic RTK GNSS Emlid Reach RS2
Gets a fix in seconds
Reach RS2 gets a fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances up to 60 km in RTK, and 100 km in PPK mode.
GPS, GLONASS, BeiDou,
Galileo, and QZSS
L1OF, L2OF, L1C/A, L2C,
E1B/C, E5b, B1I B2I
Built-in 3.5G modem
Reach RS2 features a power-efficient 3.5G HSPA modem with 2G fallback and global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on an Internet connection on your phone.
PPP support
RINEX raw data logs are compatible with PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
22 hours on 1 charge
Up to 22 hours of autonomous work when logging data and up to 16 hours as a 3G rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2 can charge from a USB wall charger or a power bank over USB-C.
Surveying
with ReachView
The most user-friendly software for data collection that is available both for Android and iOS. With ReachView, you can collect and stake out points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.
Point collection:
create projects, save points, and export in industry standard formats
Record each position as a point with centimeter precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.
Formats
DXF, CSV, GeoJSON, ESRI Shapefile
Stakeout:
Find points' position on the ground
Stakeout is used to find exact physical locations of points. They can be collected in ReachView or imported from other CAD or GIS software.
Process of stakeout in ReachView has two steps: map view and bulls-eye. Map's purpose is to help you navigate to points on long distances. When you get closer than 40 cm to the point, bulls-eye turns on to make it easier for you to visually match receiver and point.
Formats
CSV, DXF and GeoJSONs
Logging in RINEX:
record raw data, position, and base correction logs
Record raw data, position and base correction logs. Point collection and recording of RAW data are independent processes and can be used simultaneously. ReachView has a simple and intuitive interface for logging configuration and control.
We provide our version of RTKLib for PPK. It’s free and can be downloaded from our docs.
16 GB
storage
160+ days
of logging at 1 Hz
PPP for OPUS
RINEX raw data logs are compatible with PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
Connectivity
Real-time position
streaming in NMEA
Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.
Reach can turn on and off automatically
Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor
Compatible apps
MachineryGuide, AgriBus-Navi, Efarmer, Agripilot, and others
Position streaming
Interfaces
RS-232, TCP, Bluetooth
NTRIP or another Reach
as a base station
Reach RS2 needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. Base might be either another Reach RS2 receiver or an NTRIP service. VRS is also supported.
Reach RS2 works seamlessly with other Reach receivers over any link
Input and output corrections
Interfaces
TCP, LoRa, Bluetooth, RS-232, NTRIP
Formats
RTCM3
Max distance from a base
Over 60 km in RTK
100 km in PPK
Any place on Earth with PPP
Engineered to be tough
Reach RS2 is designed to work even in the most challenging environments.
IP67
RS2 is waterproof up to 1 m depth. All connectors are completely sealed and protected from water and dust with silicone plugs.
-20ºС...+65ºС
We extensively tested Reach RS2 in conditions that simulate coldest winters and hottest summers.
Polycarbonate body
Polycarbonate, an extremely durable material that is used in bulletproof glass, makes Reach RS2 impact-resistant
Covered with elastomer
This is a rubber-like material that forms a shock absorber around the whole device. In a sophisticated manufacturing process, elastomer is permanently bonded to the polycarboante base so that if your bipod falls over, Reach RS2 will bump off, no marks left.
Rugged 5/8″ mount
A precision CNC machined threaded mount is inserted during the molding process and becomes one with the plastic.
The metal mount works as a heatsink, transferring heat away from the electronic components and ensuring stable operation in a hot climate.
LoRa radio
868/915 MHz
Frequency range
Up to 8 km
At only 100mW
300% more range
Compared with FSK radios at the same power
LoRa Spread Spectrum modulation can work on distances up to 4 times longer compared with traditional FSK radios at the same power output. This gives Reach RS2 robust radio performance without sacrificing battery life. LoRa radio is used to connect rover to base when Internet-delivered corrections are not available.
Industrial battery
LiFePO4
Industrial battery that handles both high and low temperatures well.
USB-C
Reach RS2 charges from any USB port and power bank.
2 000+ cycles
of charging and discharging while maintaining original capacity.
Reach RS2 works for up to 22 hours in static logging and up to 16 hours in RTK with cellular on. You don't need to worry about having spare batteries or replacing them in the field. Hot-swaps are a thing of the past.
Compact and lightweight
126 х 142 mm
Fits in a small bag
950 g
Weighs less than
a typical survey pole
Specifications
Mechanical
- Dimensions 126x126x142 mm
- Weight 950 g
- Operating tº -20…+65 ºC
- Ingress protection IP67 (water and dust)
Electrical
-
Autonomy
16 hrs as 3.5G RTK rover,
22 hrs logging - Battery LiFePO4 6400 mAh, 6.4 V
- External power input 6–40 V
- Charging USB Type-C 5 V, 2 A
- Certification FCC, CE
Positioning
-
Static
H: 4 mm + 0.5 ppm
V: 8 mm + 1 ppm -
PPK
H: 5 mm + 0.5 ppm
V: 10 mm + 1 ppm -
RTK
H: 7 mm + 1 ppm
V: 14 mm + 1 ppm - Convergence time ~5 s typically
Connectivity
- LoRa radio
- Frequency range 868/915 MHz
- Power 0.1 W
- Distance Up to 8 km
- 3.5G modem
- Regions Global
-
Bands
Quad-band, 850/1900,
900/1800 MHz - SIM card Nano-SIM
- Wi-Fi 802.11b/g/n
- Bluetooth 4.0/2.1 EDR
- Ports RS-232, USB Type-C
Data
- Corrections NTRIP, VRS, RTCM3
- Position output NMEA, LLH/XYZ
-
Data logging
RINEX with events
with update rate up to 10 Hz -
Internal storage
16 GB
160+ days of logging at 1 Hz
GNSS
-
Signal tracked
GPS/QZSS L1C/A, L2C
GLONASS L1OF, L2OF
BeiDou B1I, B2I
Galileo E1-B/C, E5b
- Number of channels 184
- Update rates 10 Hz GNSS
- IMU 9DOF
Copyright@ 2019 Indosurta Makassar